|1||0000-0529||Main Wiper (9point8)|
|1||0000-0531||Main Air Seal (X-Ring)|
|2||0000-0777||Nut O-Ring Seal (red)|
|1||0000-0778||Foam Lube Ring|
|1||0000-0523||Spline Nut O-Ring Seal|
|2||0000-0522||Mast O-Ring Seal|
|1||0000-0225||Top Telescopic Bushing|
|1||0000-0206||Bottom Telescopic Bushing|
|3||0000-0223||Key Assembly |
(Bullet Nose Key, Spring, Tail Key)
|1||0000-0672||P10L Grease, 1/4oz Jar|
|1||0000-0755||Collar Nut v2|
These kits include a new wipers, nut seal, key's, lower bumper, as well as upper and lower bushings. The kit also includes a small amount of Grease as required for the rebuild. Use this kit if your post is getting worn, your wipers are torn/worn out, or if you have started to leak air from the main nut.
This kit is ONLY for Fall Line seatposts with the v1 Collar Nut. Use this kit only if you are replacing the v1 Collar Nut with the v2 Collar Nut (RECOMMENDED). There are other kits available if your post has a v2 Collar Nut.
See the Specs tab for a list of the Kit Contents.
In order to rebuild a Fall Line seatpost with this Kit you will need a standard cassette spline tool like the Park FR-5 or similar, and one special tool: Brake Release Tool 0000-0734
These two tools are also needed to rebuild a Fall Line seatpost.
Our Key Install Tool is also recommended, but is not required.
Fall Line Rebuild Kit: Replace v1 Nut with v2 Nut
- Product Code: 0000-0775
- Availability: In Stock