Banner Left
Live Help
0 item(s) - USD$0.00  Shopping Cart
Fall Line Brake Release Tool (Basic)

To use the tool:

1) Thread the rod into the bottom of the post.

2) Install your cassette tool over the rod

3) install the nut and washer (basic) or thumb wheel (pro) and use this to disengage the brake.  


Do NOT over tighten, finger tight only.  Once the rod stops backing off it is tight enough, tightening further does not disengage the brake more and will damage the post.

Both the basic and Pro tools fit all Fall Lines.

A Brake Release Tool is required to complete most maintenance tasks on your 9point8 Fall Line seat post.  Compatible with all Fall Lines.  


The basic tool consists of an M7x1.0 threaded rod and an M7 nut and washer.  


Note you will also need a standard cassette spline tool with a hole through the centre like a Park FR-5 or similar.  If you don't already own one they are available at your local bike store.






Fall Line Brake Release Tool (Basic)

  • Product Code: 0000-0734
  • Availability: In Stock

Copyright © NINE POINT EIGHT INC. All rights reserved